All guides / Writing
Drafts and publishing
Know where an unfinished article is kept, how to save it as a draft, and what happens when you publish.
In short#
A new article lives in your browser until you press Save Draft or Publish. Save Draft puts it on Scryve, where only you can see it. Publish makes it public. Any signed-in account can do all three.
Where your article is kept#
| Stage | Where it lives | Who can see it |
|---|---|---|
| Typing a new article | In your browser, with a copy kept about a second after you stop typing | Only that browser |
| After Save Draft | On Scryve, in My Articles under Drafts | Only you, from any device |
| After Publish | On Scryve, as a public article | Everyone |
The copy on this device#
While you type, your browser keeps a copy of your text on this device. It is not a save to Scryve. The copy is written about a second after you stop typing, and at once when you leave or hide the page. It does this only when there is something to keep: a title, a subtitle, a tag, any body text, or a language other than English. The top bar shows "Saved on this device at" and the time. On a phone the same line sits above the title.
- If you reload or come back to the Write page, a message Draft recovered says "Your previous work has been restored." and fills the page.
- Each browser tab has its own slot, so two Write tabs do not overwrite each other. The copy of a tab that was closed is offered to the next Write page you open. A tab that is still open is left alone. The copy belongs to the browser, not to your account, and signing out does not remove it.
- It keeps the title, subtitle, tags, body, drop cap, language, cover, the Premium Article switch, the reprint boxes and the choice about the email.
- A copy older than 7 days (168 hours) is deleted unread.
- Clearing the browser's data removes the copy. If you close the tab with text that is not on Scryve, the browser asks you to confirm.
- The Edit page keeps a copy too, for each article. See Edit and delete.
To remove the copy yourself, press the close button (X) on the Write page and choose Discard Changes.
Save Draft#
Press Save Draft or Ctrl or Cmd + S. The article needs a title. With no title, nothing is saved: the button shows "Add a title to save" when you point at it, and pressing it or Ctrl or Cmd + S says "Title required" and puts the cursor in the title. A message Draft saved says "You can continue editing later." and the page moves to the Edit page for that article. The browser copy is deleted.
The draft is private. Find it in Studio, My Articles, under Drafts. A draft row has Edit and Delete only; there is no preview. Saving is limited to 20 times a minute for each account, counted together with comments, profile edits and reports. Past that, the page shows the server's message, "Too many content operations. Please slow down and try again later."
Save Draft keeps the same settings as Publish: the title, subtitle, body, tags, drop cap, language, cover, the Premium Article switch and the reprint boxes (original address, canonical address and licence). The Email subscribers switch is not saved; it only matters when you publish. See Story settings.
On the Edit page, saving needs a title and some body text. A draft that holds only a title cannot be saved again until you add text.
A saved draft is saved again by itself#
Once a draft is on Scryve, its Edit page also saves the title, subtitle and text for you while you type: about 15 seconds after your last change, and at least every 45 seconds if you keep typing. The top bar then says "Draft saved at" and the time. That is a save to Scryve, not the copy on this device, and the two notes differ: the one that is newer is shown.
- It is for drafts only. A published article, and a draft that holds a seal, are never saved by themselves: they change only when you press save.
- It saves only when something changed, and not while a picture is going up or the title is empty.
- It does not save the settings panel (tags, cover, language and the rest). Press Save Draft for those.
- If the article was saved somewhere else in the meantime, it stops and the window This article changed elsewhere opens. See Edit and delete.
- Saves share a limit of 20 a minute with comments. If the limit is reached, it waits and tries again, and the top bar says "Draft not saved yet, trying again".
- The Write page, for an article not yet saved, keeps only the copy on this device until you press Save Draft.
Earlier versions#
Scryve keeps copies of the text of a saved article, so you can look back. A copy is kept when you save, and an automatic save adds one at most every 5 minutes. The newest 30 of each article are kept. A copy is also kept just before an assistant working through an agent key changes the draft.
On the Edit page, press the clock icon (Earlier versions; on a phone, the button above the title). The list shows the time, where each copy came from and its size. Choose one to compare it with the text now: green is what comes back and red is what goes away if you restore it. Restore this version puts that text in the editor and does not save it: the page asks you to save, and Undo brings back what was there. When you save, the text that was on the page is kept as an earlier version too. Saving goes through the usual rules, so restoring a sealed article's text and saving removes its seal if the text differs from what was sealed. See Edit and delete. Only you can see the list. It goes when you delete the article, and it is in the export of your data.
Publish#
- Press Publish in the top bar. If the settings panel is closed, which it is by default, this only opens the panel and scrolls to it.
- Check the cover, tags, language and the other switches. The email option shows how many people will get an email; if it is on, a line above Publish Now says so again.
- Press Publish Now at the bottom of the panel. On the Edit page of a draft, the same button reads Publish.
With the panel already open, the top-bar Publish (or Ctrl or Cmd + Enter) publishes at once. On a phone (below 640 px) the top-bar Publish never publishes: it takes you to the Publish Now button in the panel, and that button publishes. Publishing needs a title and some body text. When it works, a message "Article published!" appears and the page goes to your article.
What publishing does#
- The article gets its web address the first time it is saved, as a draft or as published, and publishing does not change it. It is
/article/followed by a name made from the title (lower case, no accents, no symbols, cut to 80 characters), a hyphen and a time code. A title with no Latin letters gives a hyphen and the time code only. - The date shown on the article is the day it was first saved, not the day you published it.
- Your followers get a notification in Scryve that you published a new article, with its title. Followers who turned on push also get a browser push, "New article from an author you follow".
- If the email option is on, followers with a verified email also get one email. It is on only for the first publication of an article that is not a reprint, and the option says how many people get it. Editing, or publishing the article again after taking it back to a draft, never sends another. See Story settings.
- Scryve refreshes its public lists and its search so the article can appear there.
Publishing does not seal the article. The address is an ordinary web address, and there is no permanent copy until you seal it. See What a seal is.
Leave without saving#
The close button (X), the browser's Back button (and Back on Android) and links inside Scryve ask Unsaved Changes ("You have unsaved changes. Are you sure you want to leave? Your edits will be lost.") when there is text that is not on Scryve. Choose Keep Editing to stay or Discard Changes to leave. On the Write page, when the article has a title, the window also offers Save Draft: it saves the draft to Scryve and then leaves, to the Drafts list in Studio (or to the link you pressed). Discard Changes on the Write page also deletes the browser copy. After you leave a draft with the close button, Studio opens on its Drafts list. If you close the browser tab, the browser shows its own warning.
If something goes wrong#
- "Authentication required" and a wallet window. You are signed in, but Scryve needs your wallet to confirm it. The message says "Please sign the message to verify your wallet." Sign it in the wallet window. If you refuse, you see Authentication failed.
- "Failed to save" or "Failed to publish". The page shows the message the server sent under the title. One cause is an article over 50,000 characters (see The editor). Shorten it and try again. Your text stays in the editor and in the copy on this device.
- "No connection. Your text is saved on this device." The save got no answer, or the connection dropped. A save that gets no answer for 30 seconds is stopped. Press Try again in the message, or save again when you are back online.
- "Your session has expired." A sign-in window opens over the page. Your text stays where it is. Sign in again, then save.
- Publish seems to do nothing. If the button is grey, add a title and some text: Save Draft needs a title, and Publish needs a title and text. If it is not grey and the panel is closed, the press only opens the panel: press Publish Now in the panel.
- A new article is missing on another device. The browser copy exists only in the browser you typed in. Press Save Draft to keep it on Scryve.
Checked: 2026-11-19