All guides / Writing
The editor
Find your way around the writing page: the top bar, the formatting tools, the "/" and "+" menus, links, and the length limit.
In short#
One editor is used to write a new article and to change a saved one. This page covers the screen, the formatting tools and the length limit. Where your text is kept while you write is on Drafts and publishing.
Open the editor#
Any signed-in account, wallet or email, can write. Open Studio and press Write. The header has a Write link on wider screens. On a phone, the round pen button in the middle of the tab bar opens it. Signed out, you see Connect to Write and a Sign in button.
To change a saved article, press Edit on its row in My Articles. See Edit and delete.
What is on the page#
You get a title, a subtitle (optional) and the body. The title and the subtitle wrap onto more lines as you type and never scroll sideways. Enter moves from the title to the subtitle and from the subtitle to the body; it never adds a line break there, and pasted line breaks become spaces. An empty body shows a hint line that mentions "/", "+" and Markdown. The text column is the same width as on the article page, and it does not move or change width when the settings panel opens or when Focus is on. The settings panel slides over the right edge on a computer and sits below the editor on a phone. It starts closed. See Story settings.
The top bar of the Write page has, from left to right: the close button (X), Undo, Redo, the text "~N words · M min read" with a "Saved on this device at" note under it, the Focus button (an icon; its hover text is "Enable focus mode - dims other paragraphs", then "Disable focus mode"), three icons for Preview, Earlier versions (saved articles only) and Outline, a keyboard shortcuts icon, Save Draft and Publish. On screens narrower than 1024 px the word count and the "Saved on this device" note move to a line above the title (the word count turns amber near the size limit and red past it). On screens narrower than 640 px the shortcuts icon is hidden, Preview, Earlier versions and Outline become three buttons in a row above the title, and every button is at least 44 px: Save Draft reads Save from 360 px wide, and below that it is only an icon (a disk). Focus mode hides the panel and dims every block except the one you are writing.
Keyboard shortcuts:
- Ctrl or Cmd + S: save a draft (on the Edit page, save your changes).
- Ctrl or Cmd + Enter: the same as the top-bar Publish button. With the settings panel closed (or Focus on), it opens the panel. With the panel open, it publishes. It needs a title and some text. See Drafts and publishing.
- Ctrl or Cmd + Shift + F: focus mode on or off (Write page only).
- "/": open the commands menu.
- Alt + F10 (Option + F10 on a Mac): with text selected, move focus to the floating bar. With nothing selected it takes the text of the line first. Press Escape, or Alt + F10 again, to go back to the text. It is also in the keyboard shortcuts list on the Write page.
The formatting keys are in the list under the keyboard icon, and below.
Format text#
Select some text. A floating bar of icon buttons appears above it, or below it when there is no room above, and always inside the screen and clear of the top bar. Each button has a name, and a button that is a switch says whether it is on (the selection is bold, a heading, and so on); a screen reader hears the same. The bar has: Bold (Ctrl or Cmd + B), Italic (Ctrl or Cmd + I), Strikethrough, Underline (Ctrl or Cmd + U), Highlight (Ctrl or Cmd + Shift + H), Heading 2, Heading 3, Quote, List, Ordered List, Code Block, Turn into, More formatting (superscript, subscript and alignment) and the link button. There is no Heading 1 button, because the article page already shows the title as its heading 1: the headings in the text start at level 2. Without a mouse, press Alt + F10 to move to the bar, use the left and right arrow keys (and Home and End) to move along it, press Enter or Space on a button, and Escape to return to the text. The bar shows only while text is selected, on a phone too, and not when a picture or an embed is selected. There is no formatting toolbar fixed to the page. On a phone it wraps onto two or three rows and every button is 44 px.
Turn into (the "T" icon with a small arrow) changes the block you are in without retyping it: Paragraph, Heading 2, Heading 3, Quote, Bullet list, Numbered list, Code block, Note, Tip or Warning. The text stays; a list item or a quote that you turn into a paragraph leaves the list or the quote. Note, Tip and Warning put the block in a callout (see Embeds, tables and code); inside a callout, they change its kind.
More formatting (three dots) opens Superscript (Ctrl or Cmd + .), Subscript (Ctrl or Cmd + ,) and the alignment of the paragraph or heading: left (Ctrl or Cmd + Shift + L), centre (Ctrl or Cmd + Shift + E) and right (Ctrl or Cmd + Shift + R). Left is where text starts, so choosing it takes an alignment off. Justified text is not offered.
Highlight, superscript, subscript and alignment are kept when you save, show on the article page, and are in the permanent copy of a sealed article. Typing ==text== does not highlight: use the button or the keys, so that text such as a == b == stays as you typed it.
You can also type Markdown, a way to format by typing symbols:
#or##at the start of a line: a heading of level 2;###: level 3>: a quote-: a bullet list;1.: a numbered list- three backticks, then a space or Enter: a code block
**bold**,*italic*,~~strikethrough~~, and text between single backticks: inline code---: a divider> [!NOTE],> [!TIP]or> [!WARNING]: a callout. Type>first, then the marker and a space
Text you paste stays as you copied it: 5*3, __init__, List<String> and a line that starts with 1986. arrive unchanged. It is read as Markdown only when it has Markdown headings, list items, a code fence, a table, a quote or a link. Then * and _ inside words, and tags such as <T>, still stay as typed. A quote that opens with [!NOTE], [!TIP] or [!WARNING] alone on its first line, as on GitHub, is pasted as a callout. Hold Shift while pasting to paste plain text in any case. Text you copy from the editor leaves as Markdown, and a callout leaves as the same kind of quote.
Add a block with "/" or "+"#
Type "/" on an empty line or after a space. Type letters to narrow the list (it matches the titles, and in Portuguese also the English names), move with Up and Down, then press Enter or click. A screen reader hears the highlighted row.
- Text: Heading 2, Heading 3, Bullet List, Numbered List, Quote, Code Block
- Media: Image, Embed
- Layout: Table (3 by 3 with a header row), Divider
- Callouts: Note, Tip, Warning (see Embeds, tables and code)
The titles are in the language of the page. Typing the English name finds an item in any language.
The round + at the left of a line (when nothing is selected) opens a list of nine items, each with its name: Heading (Heading 2), Quote, List (bullet), Code Block, Callout, Image, Embed, Table and Divider. Callout adds a note. The list opens below the line, or above it when there is no room below. Press Esc or tap elsewhere to close it. From the keyboard, press Shift + Tab from the text to reach the + when it is showing, then Enter. The first item takes focus, the up and down arrow keys move along the list, Enter chooses, Esc closes it and returns to the text, and Tab closes it and goes on. The + hangs in the margin from 1024 px wide. On a narrower screen there is no margin: it shows only on an empty line, at the right end, so it never covers text. To add a block after a line of text, press Enter first. On a phone the + and every item are at least 44 px tall.
If nothing matches what you typed after "/", the menu closes and Enter adds a new line as usual.
Images are on Images. Embeds, tables and code are on Embeds, tables and code.
Links and mentions#
To link text, select it, press the link icon (or press Ctrl or Cmd + K), type the address and press Set or Enter. With nothing selected, Ctrl or Cmd + K selects the word at the cursor first. An empty box removes the link; an existing link offers Remove Link. Place the cursor, or tap, inside a link and a small bar under the line shows its address, with Open (in a new tab), Edit (the same box, with the link selected) and Remove. The box keeps an address that starts with http, https, mailto: or tel:, a path such as /page and an anchor such as #part. An email address gets mailto: added, and any other address without a scheme gets https://. An address that starts with javascript: or data: is not accepted and the box stays open. Links copied from Google Docs lose the Google redirect and keep the real address. A web address you type in the text becomes a link by itself.
Type "@" and a letter to search writers (up to 5 results, by display name, .cell name or address). The search runs when you pause for a moment, not on every letter. Choosing one inserts a highlighted name. To link to a writer's profile, type their full name, such as @alice.cell, as ordinary text. On the article page it becomes a link. See Profile and names.
Preview and outline#
Preview (the eye icon) opens the article full screen, as readers will see it: your title, subtitle and text, drawn with the article page's own styles and your theme. From 768 px wide you can switch between Phone and Desktop: the phone view is a real 390 px wide page, so the layout changes as it does on a phone. Above the page, a list says what saving will change, for example "1 image with an inline or local source will be removed", elements and styles the page does not keep, and, if you seal the article, embeds that become links in the permanent copy. The list is left out when nothing changes. Nothing is saved from Preview. Press Esc or the close button to leave; the cursor goes back to where it was in the text.
Outline (the list icon) lists the Heading 2 and Heading 3 lines of the article, in order. Press one to go to it. The list is worked out from the text as it is now and nothing is added to the article.
Length and reading time#
An article can hold up to 50,000 characters: the title plus the text of the body. The subtitle is not counted. Hover over the "~N words · M min read" text, or move to it with the Tab key, to see "X / 50,000 characters". A screen reader reads the count as part of that text. Near the limit and past it, the text has a small warning shape as well as its colour, the text beyond the limit has a wavy underline, and a spoken message says so. Each character you see counts once: &, < and > are one character each.
- Above 45,000 the text turns amber, and the hover text adds "Approaching the 50,000 character limit. Consider shortening."
- Above 50,000 it turns red, the extra text is highlighted red, and a message Character limit exceeded says how many characters to remove. It appears once, when you cross the limit.
Words are counted between spaces and between paragraphs, list items and table cells. Each Chinese or Japanese character counts as one word. Reading time is the words of other languages divided by 200 plus the Chinese and Japanese characters divided by 400, rounded up, minimum 1 minute.
Headings, language and screen readers#
- The article page shows the title as its heading of level 1. The headings you write start at level 2, and an older article that has a level 1 heading in its text shows it to readers as level 2. What is stored is not changed.
- The writing area and the article page take the article's language from the story settings (English, Chinese (Simplified), Spanish, Portuguese (Portugal) or Portuguese (Brazil)). A screen reader then uses the right voice, and a spell checker the right dictionary.
- The writing area is named "Article text". A status message is spoken when a copy is kept on this device (the first time, then at most once a minute), when the article nears the size limit and when it is back under it. Saves you ask for, errors and going over the limit appear as messages, which are read out too.
What is kept when you save#
Scryve cleans every article when it is saved. It keeps paragraphs, headings, bold, italic, underline, strikethrough, code, lists, quotes, callouts (a note, a tip or a warning), links, images, tables, dividers and supported embeds.
It also keeps superscript, subscript, highlight and the alignment (left, centre, right) of a paragraph or heading. It does not keep small text or collapsible sections (their text stays). It removes video and audio tags, drawings (SVG), scripts and styles together with what is inside them. Dragged column widths are not kept; merged table cells are. Pictures that carry their data inside the text (pasted from Word or Google Docs) are removed: add the picture with Image. Anything removed disappears without a message from the save itself, so use Preview (below) to see what a save will remove before you save.
If something goes wrong#
- Save Draft and Publish stay clickable above 50,000 characters, but the save is refused. The page says how far over you are, for example "The article is 120 characters over the 50,000 limit." Shorten the text and save again.
- On a phone the counter is hidden. You see only the Character limit exceeded message, once.
Checked: 2026-11-19